NTC ADSL Configuration

Please follow the following steps for your ADSL configuration.

Before going to the main configurations, make sure all the hardware's are set up properly.

To set up the hardware's properly, please follow these simple steps.

1.Take the telephone incoming line and insert it in the splitter( you need to buy the splitter to use ADSL) - there is one port in one side and two ports at the other side of the splitter). Insert this main line in the single port one.

2. From the other side of the splitter, join one to the phone line(land line) and the other to your router.

Now, the hardware's on place. Follow these to configure the ADSL.

1. Open your laptop/desktop.

2. Now open any web browser (Internet explorer, Firefox, Google Chrome etc.) and Enter address 192.168.1.1

3. Here, a login interface appears. By default,

username : admin

password : admin

4. Remember, the required settings for ADSL are
VPI – 8
VCI – 81
Connection type/ ISP = PPPoE
Username and passwords as given by Nepal telecom
PPPoE service name = ntc
Authentication = AUTO
Encapsulation = LLC

5. If you find difficulties; don't worry ; here are the screen shots for different commonly used routers in Nepal.

For Digicom :

Step 1.

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

For TPLink:

Step 1

Step 2

 For D-Link

Step 1

Step 2

Step 3

Step 4

Step 5 

Step 6

For CNet

Step 1

Step 2

Step 3

Step 4

Step 5

Hope you had your ADSL Set up properly. Happy surfing.

These images have been taken from NTC's site.

Tplink – www.ntc.net.np/internet/adsl/adslRouterConf/tplink/tplink.html
Digicom – www.ntc.net.np/internet/adsl/adslRouterConf/digicom/digicom.html
Dlink – www.ntc.net.np/internet/adsl/adslRouterConf/dlink/dlink2730U.html
Cnet – www.ntc.net.np/internet/adsl/adslRouterConf/cnet/car2-804.html

How to recharge NTC ADSL from phones ?

We can now pay our NTC ADSL bills through our land line phone or our mobile phones. 
Steps to follow: 

Step 1. Dial 1413 from your mobile or land line phone 

Step 2. Press 1 for Nepali ( if you want instructions in Nepali) or 2 to proceed in English 

Step 3. Press 4 for unlimited ADSL and enter your phone number like 015555555# (IMP: the                   number should be followed by # key)

Step 4.  If your ADSL is volume base like 20 GB , 10 GB per month then press 5 and enter the                 phone number like 015555555# and the number should be followed by # key 

Step 5. After the completion of the previous steps, press the PIN code from your Pre-paid                        recharge card followed by # like for example 1234 5678 8900 3456# the PIN code                      should also followed by the #key 

Step 6. If your recharge card is Nrs.100 or Nrs. 200 or Nrs. 1000 then respective amount will be               pay for your ADSL.

For any other queries do write to me or leave comments below.